Loading ...
Loading ...
Loading ...
7
PRODUCT SPECIFICATIONS
FUNCTIONAL DESCRIPTION
The DELTA
®
Oscillating Edge Sander is a professional-grade tool designed for both straight and angled edge-face
sanding as well as contour sanding. It is capable of sanding in either the vertical or horizontal plane. Your DELTA
®
Oscillating Edge Sander comes with a 100 grit sanding belt and is mounted on a cabinet base that provides ample
storage space for accessories. This tool is powered by a 1 1/2HP, 120/240V induction motor that drives the sanding belt
and provides an oscillation stroke of 1/2 inch at a rate of 108 strokes per minute.
UNPACKING
Your Oscillating Edge Sander comes packed in a single container. Open the shipping container and check that all parts
are present and in good condition:
TOOLS NEEDED
FOR ASSEMBLY
• Two 12mm wrenches or
sockets
• 10mm wrench or socket
• Flat head screw driver
• Phillips head screw driver
• Rubber mallet
DESCRIPTION (QUANTITY)
Front Cabinet Panel with Door (1)
Rear Cabinet Panel (1)
Side Cabinet Panels (2)
Cabinet Shelf (1)
Rubber Feet (4)
Lock Knob - 35mm (1)
Lock Knob - 20mm (1)
Lock Knob - 12mm (2)
Contour Sanding Table (1)
Drum Guard/Dust Port (1)
Owner’s Manual (1)
Warranty Card (1)
Table Assembly (1)
Back Stop Bracket (1)
Belt Tension Handle (1)
Belt Tracking Tool (1)
Miter Gauge Assembly (1)
Sanding Belt (1)
Mounting Bracket (1)
HARDWARE
5/16 inch x 5/8 inch Screws (4)
5/16 inch Flat Washers (22)
5/16 inch Hex Nuts (12)
5/16 inch x 5/8 inch Hex Cap Bolts (8)
5/16 inch x 1 1/4 inch Hex Cap Bolts
(2)
5/16 inch Flat Washers (4)
5/16 inch Lock Washers (10)
M5x10 Pan Head Screws (2)
M5 Flat Washers (2)
M5 Lock Washers (2)
1/4 inch x 5/8 inch Hex Cap Bolts (5)
1/4 inch Flat Washers (5)
1/4 inch Lock Washers (5)
10 24 x 3/4 Socket Head Cap Screws
(2)
Pan Head Screws (3)
T-Nuts (2)
Compare the contents of your container with the parts list to make sure all
parts are present and intact. Report any missing or damaged parts to your
distributor. Prior to tool assembly and use, read this manual thoroughly to
familiarize yourself with proper assembly, maintenance and safety procedures.
Model 31-482
Fence (HxL) 4 inches x 24 inches
Abrasive Belt Size (WxL) 6 inches x 89 inches
Dust Chute Diameter 4 inches
Contour Sanding Table Size 9 3/4 inches x 11 3/4 inches
Table Size (LxW) 10 inches x 29 3/4 inches
Table Tilt 0-90°
Motor 1 1/2HP, 120/240V, 1PH, 60Hz, TEFC
Sanding Belt Speed 3900 FPM
Oscillation Stroke 1/2 inches
Oscillations per Minute 108
Overall Dimensions (LxWxH) 51 inches x 26.5 inches x 20 inches
Net Weight, approximate 218 lbs
Shipping Weight, approximate 233 lbs
Loading ...
Loading ...
Loading ...