Troy-Bilt 24BL59M5766 TB 33 LS Log Splitter

Operator’s Manual - Page 13

For 24BL59M5766. Also, The document are for others Troy-Bilt models: LS 33 TB

PDF File Manual, 40 pages, Read Online | Download pdf file

24BL59M5766 photo
Loading ...
Loading ...
Loading ...
13se c t i O n 5 — Op e r a t i O n
Using the Control Handle

 
position to move wedge toward the log to split.
NOTE: The control handle will return to the NEUTRAL

position only).
 Release the control handle or move the lever
to the NEUTRAL position to stop the wedge movement.
REVERSE — Move the control handle to the REVERSE
position to return the wedge toward the cylinder. The
control handle stays in the REVERSE position and returns to
the NEUTRAL position automatically when fully retracted.
Do not hold the handle in the REVERSE position when fully
retracted.
NOTE: The REVERSE position may also be moved back to
the NEUTRAL position manually, if necessary.
If the control handle on your log

IMMEDIATELY and contact an authorized service
dealer.
Do not attempt to service, repair or
replace control valve. Contact an authorized service
dealer.
Do not attempt to adjust or modify the
control valve or the hydraulic system from its
original settings or manufacture in any way.
Splitting the Wood

manual included with the log splitter.
2.
in the direction of the grain.
To stabilize the log, place your left hand on the side of the 3.

Never place a hand on the ends of the
log, between the log or end plate and the splitting
wedge.

who loads and stabilizes the log, must be the person
who operates the control handle.
Move the control handle to the forward position to split the 
wood.
Remove left hand from the side of the log once wedge just 5.
contacts the log. Continue moving control handle forward
to split the log.
Release the control handle to stop the wedge movement.
Move the control handle to the reverse position to return 7.
the wedge.
To remove partially split wood from wedge, move the 8.
control handle to the REVERSE position until the wedge is
fully retracted to allow split wood portion to contact the
log dislodger.
Never remove partially split wood from
the wedge with your hands. Fingers may become
trapped between the split wood.

the wood from the opposite end or in another location.
1
2



To


To Stop






Loading ...
Loading ...
Loading ...