Troy-Bilt 24BL59M5766 Operator’s Manual

Loading ...

10 se c t i O n 3— as s e M b l y & se t -up

NOTE: Approved fluids include Shell Tellus® S2 M







recommended that fluids be mixed, to top off the reservoir



Fluid only.

Replace the vented dipstick securely, tightening it until the 

top of the threads are flush with top of the pipe.

Disconnect the spark plug and prime the pump by pulling the 5.



Reconnect the spark plug wire and start the engine 



Use the control handle to engage the wedge to the farthest 7.

extended position. Then retract the wedge.

Refill the tank as specified on the dipstick if necessary8.

NOTE: 

warranty.



remove any trapped air in the system (the system is “self-



Refill the reservoir within the range marked on the dipstick 

if necessary.

NOTE: Some fluid may overflow from the vent plug as

the system builds heat and the fluid expands and seeks a

balanced level.

Tire Pressure

The max recommended operating pressure is 30 psi. Do



recommended psi. Maintain equal pressure in both tires.

Excessive pressure when seating beads

may cause tire/rim assembly to burst with force

sufficient to cause serious injury.

Loading ...

Troy-Bilt 24BL59M5766 TB 33 LS Log Splitter