Loading ...
Loading ...
Loading ...
Operation
5
12
Pre-Start Checklist
Remove the dipstick and check hydraulic fluid level.
Refill if necessary. Approved fluids include Shell Tellus®
engine oil level. Refill if necessary.
Check the engine oil level. Refill if necessary.2.
Fill up with gasoline if necessary.3.
Lubricate the beam area where the splitting wedge will
slide with engine oil. Do not use grease to lubricate. Make
sure to lubricate both the front and the back of the beam
face.
Attach the spark plug wire to the spark plug.5.
Starting the Engine
for Detailed starting instructions.
Read, understand and follow all the
instructions and warnings on the machine and in
before operating.
Using the Log Splitter
Wear leather work gloves, safety shoes,
ear protection and safety glasses when operating
the log splitter. Ensure safe footing.
Operating Positions
2.
3.
and lock into place.
Take extra care when raising and
second person assist with raising or lowering the
beam is recommended. Be sure to keep hands away
from any possible pinch points.
follows:
Always use the log splitter in the
vertical position when splitting heavy logs.
a.
beam and pivot the beam to the vertical position.
To lock the beam in the vertical position, pull out b.
on the vertical beam lock and rotate it to secure the
beam. See Fig. 5-2.
5.
follows:
a.
The horizontal beam lock is self-locking. The spring b.
loaded lock will snap into place when the beam is
lowered into position. See Fig. 5-3.
1
2
Loading ...
Loading ...
Loading ...