Loading ...
Loading ...
Loading ...
6
The only tool you’ll need to assemble your vacuum cleaner is a medium
sized flat-head screwdriver.
Do not plug in your vacuum cleaner until you are familiar with all
instructions and operating procedures.
Before using your vacuum, make sure that the dirt container is in the
locked position and that all filters (pre-motor and HEPA post- motor) are
in place. Do not operate your vacuum without these filters.
CAUTION:
CAUTION:
!
!
1. Locate the handle inside the box.
Remove the screw packet taped
to the handle
2. Stand the vacuum upright and from
the top of the unit, slide the base of
the handle firmly into the opening at
the top of the vacuum body
3. Push the handle all the way into the
opening and ensure that the handle
fits firmly to the vacuum body and is
unable to turn
4. Insert the provided screw into the
existing hole, attaching the handle
to the body of the vacuum. Tighten
securely with a screwdriver
1. Slide the extension wand and
crevice tool into the storage clip
on side of vacuum
2. Slide the dusting brush into the
storage clip on back of vacuum
3. Store the Pet TurboBrush on the
back of the handle by lining up
the TurboBrush with the hook on
the base of the holder then push
forward to snap into place
Attach handle to vacuum
Attach tools and accessories
ASSEMBLY:
2
3
3
https://manual-hub.com/
Loading ...
Loading ...
Loading ...