Loading ...
Loading ...
Loading ...
Fig. 67
u
Removing the water tank: Lift the water tank by the
recess Fig. 67(1).
u
Remove the water tank Fig. 67(2) upwards.
u
Remove the ice cube drawer Fig. 67(3) to the front.
Fig.68
u
Removing the EasyTwist-Ice body: Use your finger to
push the tab Fig. 68 (4) down and use your other hand
to lift the EasyTwist-Ice body Fig. 68 (5) from behind at
the same time.
u
Remove the EasyTwist-Ice body from the freezer drawer.
Fig. 69
u
Removing the EasyTwist-Ice body cover: Push the tabs
Fig. 69 (6) on both sides of the EasyTwist-Ice body with
one hand.
u
Use the other hand to remove the cover Fig. 69 (7)
upwards.
w
EasyTwist-Ice is dismantled into four parts. (see Fig.70)
Fig. 70 Components of the EasyTwist-Ice
(1) EasyTwist-Ice body
with ice cube tray
(3) Cover
(2) Water tank (4) Ice cube drawer
NOTICE
Risk of damage due to improper dismantling!
Equipment breaking, jumping and cracking. If you dismantle
the EasyTwist-Ice body further, you may damage the rotary
knob or other parts of the EasyTwist-Ice body.
u
Only dismantle the EasyTwist-Ice into the components
shown. (see Fig.70)
u
Clean the EasyTwist-Ice body Fig.70(1) as a whole.
Cleaning the EasyTwist-Ice
Make sure that the following requirements are fulfilled:
q
The EasyTwist-Ice is dismantled. (see Dismantling the
EasyTwist-Ice)
u
Clean the ice cube drawer, water tank, cover and Easy‐
Twist-Ice body with warm water and a little detergent.
u
Dry all cleaned components thoroughly with a dry cloth.
w
The EasyTwist-Ice is clean.
Installing the EasyTwist-Ice
Fig.71
u
Installing the EasyTwist-Ice body cover: Place the cover
on the front. Fig.71(1)
u
Lower the cover at the rear. Fig.71(2)
w
The cover locks into both tabs Fig.71(3) audibly.
Maintenance
* Depending on model and options 19
Loading ...
Loading ...
Loading ...