Loading ...
Loading ...
Loading ...
NOTICE
Sugar-content liquids!
Damage to EasyTwist-Ice.
u
Only fill with cold drinking water.
Note
Using filtered, decarbonised water ensures the best-tasting
drinking water for your ice cubes.
This water quality can be achieved using a table water filter
of the kind available in trade retail outlets.
u
Always fill the water tank only with filtered, decarbonised
drinking water.
Fig. 62
u
Pull out freezer drawer as far as it will go.
u
Lift the water tank at the recess Fig. 62(1).
u
Remove the water tank by lifting it upwards. Fig. 62(2)
u
Fill the water tank with drinking water up to the mark
Fig. 62(3).
Fig.63
u
Position the water tank at the front. Fig.63(1)
u
Lower the water tank at the rear. Fig.63(2)
u
Slide in the freezer drawer.
Releasing the ice cubes
Make sure that the following requirements are fulfilled:
q
The required time for the production of ice cubes has
been observed. (see 10.1 Technical specifications)
q
Freezer drawer is fully inserted.
q
Ice cube drawer is fully inserted.
u
Turn the rotary knob Fig. 61 (4) clockwise as far as it will
go.
w
Ice cubes fall from the ice cube tray into the ice cube
drawer Fig.61(5).
If all the ice cubes do not come out of the ice cube tray:
u
Turn the rotary knob clockwise several times to the stop.
8.3 VarioSpace
Fig.64
You can remove drawers and glass panels from your appli‐
ance. This provides more room for large food items such as
poultry, joints of meat, large game, and tall baked products.
You can then freeze these items whole for later preparation.
u
Note the weight limits on the drawers and glass panels
(see 10.1 Technical specifications) .
9 Maintenance
9.1 Disassembling / assembling pull-
out systems
9.1.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-out
systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system
can be disassembled/
cannot be disassembled
Top tilting drawer cannot be disassembled
Drawer on
moulded rib
can be disassembled
(see 9.1.2 Drawer on moulded rib)
Bottom drawer cannot be disassembled
9.1.2 Drawer on moulded rib
Disassembling pull-out system
Make sure the following prerequisites are met:
q
Drawer has been removed. (see 8.1.2 Drawer on moulded
rib)
Fig. 65 Attachment on the right moulded rib
u
Grab attachment at the back from below.
Maintenance
* Depending on model and options 17
Loading ...
Loading ...
Loading ...