Loading ...
Loading ...
Loading ...
5
For the User
2. USER SERVICING INSTRUCTIONS
2.1 QUARTERLY MAINTENANCE
1. Turn the unit off and unplug it.
2. Open the door by either opening the side latches or removing the screws, depending on the model.
3. While holding the core (), loosen the wing nut and rotate the core retaining bracket (). Slide out the core and filters.
4. Clean the inside of the unit with a damp cloth and wipe with a clean dry one.
5. Remove filters from the core top and wash under warm water with mild soap. Rinse thoroughly
and let dry completely.
6. Clean the recovery core:
Remove the dust using a vacuum cleaner with a soft brush attachment.
7. Reinstall the filters on the core. Refer to the core label for proper location.
8. Slide the core and filters in the unit. Refer to the filters position indicators embossed in the unit
to position the core properly. Rotate and tighten the core bracket.
9. Close the door and plug the unit back in. The unit will return to its previous setting after performing a booting sequence.
2.2 ANNUAL MAINTENANCE
1. Perform steps 1 to 6 of Quarterly Maintenance.
2. Clean the supply side damper using a vacuum cleaner and a soft brush attachment. Check if it can move freely.
3. Clean the exterior hoods.
4. Proceed with steps 7 to 9 of Quarterly Maintenance.
⚠ WARNING
High voltage risk. During maintenance or repairs, always stop the unit then unplug it to prevent any risk of electric
shock. The wearing of safety glasses and gloves is recommended when handling unit components to prevent any
risk of injury that could be caused by the presence of thin metal.
CAUTION
Water could fall out when opening the door.
VO0278
⚠ WARNING
Always hold the core while rotating the core retaining brackets.
⚠ WARNING
Hold the core until the core retaining bracket is tightened.
CAUTION
Do not soak the energy recovery core in water.
Loading ...
Loading ...
Loading ...