Loading ...
Loading ...
Loading ...
25
Care & Cleaning
CAUTION
Any leftover food or debris remaining in the Unit
could prevent safety devices from operating
correctly during subsequent use!
FOLLOW THESE CLEANING INSTRUCTIONS
AFTER EACH USE.
1. Allow Unit to cool to room temperature before
cleaning. Do not attempt to clean a hot Power
Quick Pot!
2. Unplug the Power Cord from the wall and then
from the Unit Base.
3. Clean exterior of the Unit with soft, damp cloth
or paper towel. Do not immerse the Unit Base
in water or pour water into housing.
4. Unlock the Pressure Release Valve by moving
the Steam Release Switch to the Open position
and let go. Wash with mild, soapy water
and rinse well. Use a small pin if necessary to
remove any blockages that may have occurred
during cooking process. Check to see that the
interior spring-loaded part moves freely
by pressing down on it. Check to see that it is
free from debris.
5. Clean the Lid and Inner Lid (see INNER LID
ASSEMBLY, p. 12). Remove the Inner Lid
Rubber Gaskets from the Inner Lid. The Inner
Lid Rubber Gaskets must be washed separately
with a sponge or soft cloth and warm, soapy
water. Reattach the Inner Lid Rubber Gasket
Rubber Gasket to the Inner Lid.
NOTE: Check periodically to make sure the
Rubber Gasket is clean, exible, and not torn.
If damaged, replace before operating Unit (see
INNER LID ASSEMBLY, p.12).
6. Rinse upper and underside of Lid with warm
water, making sure the Float Valve and Pressure
Release Valve are free from debris. Both valves
should be able to move up and down freely,
with the Float Valve stopping only when the
Float Valve Rubber Gasket meets the Lid. Dry.
7. Attach the Inner Lid to the Lid. Improper
placement of the Inner Lid will prevent
the Lid from closing properly. (see INNER LID
ASSEMBLY, p. 12).
8. Remove the Inner Pot after every use.
The Inner Pot is dishwasher safe, but to prolong
its use, you should wash it by hand using warm,
soapy water and a soft cloth or sponge.
Rinse and towel dry. Do not use harsh chemicals
or scouring pads.
9. To clean the condensation collector, slide
to remove it; clean with warm, soapy water;
and then reattach it.
10. Customer Service should be contacted for any
questions or parts (see the back of this manual
for contact information).
NOTE: The following parts can be placed
in dishwasher: Inner Pot, Measuring Cup,
Spoon. We recommend hand washing all
parts to prolong the life of the components.
Loading ...
Loading ...
Loading ...