FLUKE 729 300G FC User Manual for the Fluke 729 300G FC Pressure Calibrator with Fluke Connect, 300 psi, 20 bar

Loading ...

729/729FC

Users Manual

Source mA Mode

The operation mode (for example, measure or source)

shows on the display. If the Product is not in mA source

mode, push M.

To source mA:

1. Connect the test leads as necessary.

2. Key in the necessary output value (for example, to

source 5.5 mA, push 5.5E).

3. Push E.

4. To change the output value, record a new value and

then push E.

4. To set the output value in the present source function,

push P then enter the desired value and push E.

5. To turn off sourcing completely, select another function.

Note

Use the source current function to drive a current

input device. This is different from the loop power

function in which the Product is powering a

process instrument.

4 to 20 mA Simulation

To configure the Product as a load on a current loop:

1. Move the cursor to the analog function indicator and

push D (Simulate Current).

2. Enter the necessary value.

3. Connect an external loop supply to the mA port as

shown in Figure 21.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 729 300G FC Pressure Calibrator with Connect, 300 psi, 20 bar