FLUKE 729 300G FC User Manual for the Fluke 729 300G FC Pressure Calibrator with Fluke Connect, 300 psi, 20 bar

Loading ...

Automatic Pressure Calibrator

Tasks Menu

Pressure Switch (SW)

Use this feature to calibrate a pressure switch. See

Figure 12 for connections:

1. From page 1 of the Tasks menu, push the arrows to

highlight Pressure Switch (SW).

2. Push E or R.

3. From this screen, use the arrows, numeric keypad,

and E to change the values of these parameters:

• Setpoint

• Tolerance

• Min Deadband

• Max Deadband

• Max Pressure

• Switch Type

Note

Make sure to push E after EACH value

change.

You can save these settings as a customized task.

Push B (Save as Customized). Recall this

customized task from the Tasks menu.

4. Once you enter the parameters, push D

(Continue).

5. Push D (Auto Test) or B (Manual Test)

to do the As Found switch test. The test runs.

After the test runs, the results show on the display.

To save the test results:

1. Push D (Done).

2. Push E to edit the Tag information.

3. Push D (Done).

4. Move the cursor to the S/N field (Serial Number).

5. Push E to edit the S/N information.

6. Push D (Done).

7. Move the cursor to the User ID field.

8. Push A (User List) to select a user.

9. Push D (Done).

10. Adjust the switch and push B(Step Up)

and C(Step Down) to verify.

11. Push A (As Left) to do the As Left test.

1.888.610.7664 sales@GlobalTestSupply.com

Fluke-Direct.com

Loading ...

FLUKE 729 300G FC Pressure Calibrator with Connect, 300 psi, 20 bar