Loading ...
Loading ...
Loading ...
Before You Start
●
Ensure your device supports PoC (Power over Coaxitron) cameras connecon.
●
Ensure your device has free analog channel resource. The analog channel resource is
congurable in Conguraon → Camera → Analog .
●
Connect the PoC camera to the DVR.
Steps
Cauon
Only Hikvision PoC camera is supported. Please turn o the PoC funcon if the camera does not
support PoC, or the camera is not produced by Hikvision. Otherwise, it may result in permanent
damage to the camera or DVR.
1. Go to Conguraon → Camera → Analog → PoC Seng .
Figure 5-8 Connect PoC Camera
2. Turn on the PoC for the channel(s) as your desire.
3. Check the status of connected PoC camera.
●
If the power consumpon of the DVR is lower than that of AF camera, when AF or AT camera
is connected, there is no video and Insucient Power for PoC would be overlaid on the live
view image.
●
If the power consumpon of the DVR is higher than that of the AF camera and lower than that
of the AT camera, when AF camera is connected, it would be powered on normally; when AT
camera is connected, it would be powered on and then powered o, thereaer, the DVR
displays Insucient Power for PoC on the live view image.
●
If the power consumpon of the DVR is higher than that of the AT camera, when AF or AT
camera is connected, it would be powered on normally.
4. Check the connected AF or AT camera number and the connectable camera number.
Note
The maximum connectable AT/AF camera number varies with dierent models.
Digital Video Recorder User Manual
25
Loading ...
Loading ...
Loading ...