Loading ...
Loading ...
Loading ...
14
USING THE TRIGGER HANDLE
WARNING: Hold the trigger handle securely with both hands. Expect the trigger handle to
move when the trigger is pulled due to reaction forces. Failure to do so could cause loss of
control and injury to yourself and others.
1. Pull back and hold the trigger to operate the pressure washer.
2. Release the trigger to stop the flow of water through the nozzle.
To engage the lock out:
Push up on the lock out until it clicks into the slot.
To disengage the lock out:
Push the lock out down and into its original position. Start with the
nozzle 1–2 ft. away from the cleaning surface and carefully approach
the surface just until the desired level of cleaning is achieved. If the
spray is too close it can damage the cleaning surface.
INSTALL THE NOZZLE
1. Pull back quick–connect collar and install the 5-in 1 nozzle.
2. Release quick-connect collar to secure nozzle.
3. Verify nozzle is locked in place.
DANGER: Risk of fluid injection. Do not direct
discharge stream toward persons, unprotected skin, eyes or any pets or animals. Serious
injury will occur.
WARNING: Flying objects could cause risk of serious injury. Do not attempt to change
nozzles while pressure washer is running. Turn engine off before changing nozzles.
WARNING: Flying object could cause risk of serious injury. Ensure nozzle is completely
inserted in quick- connect socket and quick-connect collar is fully engaged (forward)
before squeezing gun trigger.
SPRAY
PATTERN
USES
SURFACES*
0˚
powerful pinpoint for spot
cleaning of hard,
unpainted surfaces or for
high reach areas
unpainted metal or
concrete;
DO NOT use on wood.
15˚
intense cleaning of
unpainted hard surfaces
grills, driveways, concrete or
brick walkways, unpainted
brick or stucco.
25˚
intense cleaning of larger
areas
metal, concrete or wood.
Loading ...
Loading ...
Loading ...