Loading ...
Loading ...
Loading ...
13
4. Insert the safety key.
5. If the machine is not going to be used immediately, do not insert the safety key.
6. Close the door.
TO REMOVE BATTERY PACK
1. Release the power lever to stop the product.
2. Remove the safety key.
3. Press and hold the battery latch button at the bottom of the battery pack.
4. Remove battery pack from the product.
STARTING AND STOPPING THE PRESSURE WASHER
NOTICE: Do not run the pressure washer without water supply connected and turned on, as this may
damage the high pressure seals and decrease pump life. Completely unwind the hose from its reel or coil
and make sure the hose is not being restricted by tires, rocks, or any other objects that may lessen or
prevent water flow to the pressure washer.
Before starting the pressure washer:
Connect all hoses.
NOTE: Make sure the pressure washer’s water intake screen is in place and unclogged before connecting
garden hose.
Turn on the garden hose then pull the trigger to relieve air pressure; hold the trigger until a steady
stream of water appears.
NOTE: Make sure the faucet is turned on fully and that there are no kinks or leaks in the hose.
To start the pressure washer:
1. Set the power switch to the “ON” (I)position.
2. Pull the gun trigger.
To stop the motor:
1. Put the on/off switch in the “OFF” (O) position.
2. Pull trigger to release water pressure.
NOTICE: If you do not use the machine：
• Stop the machine.
• Turn the water supply off.
• Remove the battery pack.
• Pull the gun trigger to release the remaining pressure from the machine.
• Lock the trigger safety button.
Loading ...
Loading ...
Loading ...