Loading ...
Loading ...
Loading ...
12
OPERATING INSTRUCTION
WARNING
Do not allow familiarity with tools to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this
tool. The use of attachments or accessories not recommended can result in serious personal
injury.
WARNING
Never direct a water stream toward people or pets, or any electrical device. Failure to heed
this warning could result in serious injury.
APPLICATIONS
You may use this tool around the house for cleaning most small to large horizontal or vertical exterior
surfaces, smaller exterior objects and structures, and outdoor equipment and tools.* You can:
Clean or remove mold and mildew from weathered decks, driveways, patios, walkways, sidewalks,
etc.
Remove dirt from various exterior vertical surfaces such as house exteriors, siding, fences, brick,
concrete or stone walls, etc.
Wash boats, outdoor furniture, powered or non-powered garden equipment, gutters, window screens,
grills, play ground equipment, etc.
*Always test in an inconspicuous area first
DETERGENT ADDING AND USE
Use only detergents designed for pressure washers; household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solution can damage the pump. Many detergents may
require mixing prior to use. Prepare cleaning solution as instructed on the solution bottle.
SOAP APPLICATION
Soap is applied under low pressure high volume for optimum performance.
Soap can not be applied under high pressure with this machine.
Soap/detergent can only be applied with this machine when the black soap tip is installed.
CAUTION
Use only approved pressure washer cleaners. Do not use bleach, chlorine,or any cleaners
containing acids.
TO INSTALL BATTERY PACK
1. Lift and hold up the battery door.
2. Align guided ribs on battery pack with grooves in the product’s battery port.
3. Make sure the latch on bottom of the battery pack snaps in place and that battery pack is fully seated
and secure in the product before beginning operation.
Loading ...
Loading ...
Loading ...