Loading ...
Loading ...
Loading ...
AXIS Q1602 N etwork Camera
System Options
Link-Local IPv4 Address
Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access
the p roduct from o ther hosts on the same segment on the local network. The product can have a Link-Local IP and a static
or DHCP-supplied IP ad dress at the same time.
This function can be disabled under System Options > Network > TCP/IP > Advanced.
HTTP
The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. Any port in the
range 1024–65536 can be used. The default setting is 80.
HTTPS
The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. Any port in the
range 1024–65536 can be used. The default setting is 443.
To enable HTTPS, go to System Options > Security > HTTPS. Fo r more information, see page 30.
NAT traversal (port mapping) for IPv4
A network router allows de vices on a private network (LAN) t o sha re a single connection to the Internet. This is done by for warding
network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased
since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).
Use NAT traversal when the Axis product is located on an intrane t (LAN) and you wish to make it available from the other
(WAN) side of a N AT route r. With NAT trave rsal properly configured, all HTTP traffic to an external HTTP port in the NAT router
isforwardedtotheproduct.
NAT traversal is configured under System Options > Network > TCP/IP > Advanced.
Note
• For NAT traversal to work, this must be supported by the router. The router must also support UPnP
TM
.
• The router has many d ifferent names: “NAT router”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband
sharing device” or “Home firewall” but the essential purpose of the device is the sa
me.
Enable/Disable - When enabled, the Axis product attempts to configure port mapping in a NAT router on your network, using UPnP
TM
.
Note that UP nP
TM
must be enabled in the product (see System Options > N etwork > UPnP).
Use manually selected NAT router - Select this option to m anually s elect a NAT router and enter the IP address for the router in
the field. If no router is specified, the product automatically searches for NAT routers on your network. If more than one router is
found, the default router i s selected.
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter the port number in the field. If no port is
entered here, a port number is automatically selected when NAT traversal is enabled.
Note
• An alterna tive HTTP port can be used or be active even if NAT traversal is disabled . This is useful if your NAT router does
not support UPnP a nd you need to manually configure p ort forwarding in the NAT router.
• If you attempt to man
ually enter a port that is already in use, anothe r available port is automatically selected .
• When the port is selected automatically it is displayed in this field. To change this, enter a new port number and click Save.
FTP
The FTP server running in the Axis product enables upload of new firm ware, user applications, etc. The FTP server can be d isabled
under System Options > Network > TCP/IP > Advanced.
34
Loading ...
Loading ...
Loading ...