Loading ...
Loading ...
Loading ...
21
To decrease (cool) the set temperature by 1°C or 1ºF.
Setting Selector
Select the temperature and humidity you want to set.
Symbols in the Display
Temperature or Error code display for upper/left zone
Temperature or Error code display for lower/right zone
Compressor is ON.
Heater is ON.
Defrosting mode.
DynaClima mode.
Eco Demo mode.
The interior light is in Showcase mode.
Warning
Audible tones signal
Child lock is activated
Wifi connection signal
Anti-condensation mode
Relative humidity display (Only display the humidity, cannot control it)
Multi-key Function
To perform the multi-key function, lightly touch and hold the first key, then touch the rest key for at
least 5 seconds and then release all the keys.
Child Lock
If in 2 minutes or longer without touching any key, the child lock will be activated automatically for
models with the control outside of cabinet. To cancel the lock, lightly touch the UP and DOWN
keys simultaneously for at least 5 seconds until the symbol is go out.
Setting the Temperature Control
• The unit has two separate temperature zones. The temperature of both zones can be set
between 5ºC and 20ºC (41ºF and 68ºF). It can be used as a wine maturing cabinet or a wine
serving cabinet. For maturing wine, the recommended temperature setting ranges of both zones
should be between 11ºC and 14ºC (52ºF and 57ºF). For serving wine, the recommended
temperature setting range of UPPER/LEFT zone should be between 5ºC and 10ºC (41ºF and
50ºF) which is ideal for serving champagne & white wine and the recommended temperature
setting range of LOWER/RIGHT zone should be between 15ºC and 20ºC (58ºF and 68ºF) which
is ideal for serving red wine.
• When the unit is plugged in for the first time, the unit will power up automatically to the preset
defaults. The preset temperature at the factory for UPPER/LEFT temperature zone is 8ºC (46ºF)
and for LOWER/RIGHT temperature zone is 12ºC (54ºF).
• Touch the Setting Selector until the temperature you want to set is flashing. Then you can use
the UP and DOWN keys to set the internal temperature as required. When you touch either key
at the first time, the display will show the last temperature set previously.
• The temperature will increase 1°C/1ºF if you touch the UP key once, or the temperature will
decrease 1°C/1ºF if you touch the DOWN key once. The display flashes while you make the
setting.
Loading ...
Loading ...
Loading ...