Loading ...
Loading ...
Loading ...
13
Adjusting the Kick Plate (Only for ADA
models)
The pre-fitted kick-plate of the appliance includes an
adjustable kick-plate section that is initially seated
behind the upper section. In order to adjust the kick-
plate height, follow the instructions below:
1. Remove the screws (1) from both the top left- and
top right-hand sides of the kick-plate.
2. Loosen or remove the screws (2) from both the
bottom left- and bottom right-hand sides of the kick-
plate. Failure to loosen the bottom screws
sufficiently may cause damage to the lower trim
when adjusting it.
3. Carefully guide the lower trim down until the desired
height is achieved.
4. Reinsert screws and tighten them.
Installing a Stainless Steel Handle
This appliance includes a stainless steel handle that is
not required to operate the unit. To install the handle,
follow the instructions below:
Locate the handle (1) over the mounting stub (3) of the
door and using the supplied Allen key, tighten the
securing grub screws (2) to fix the handle.
1
2
3
1
2
Loading ...
Loading ...
Loading ...