Loading ...
Loading ...
Loading ...
AXIS M3006–V Network Camera
Accessing the Product
Configure Capture Mode
Capture mode defines the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting also
affects the camera’s an gle of view; if using a capture mode wi th a sma lle r maximum resolution, the angle of view is reduced.
Select the desired capture mode fro m the drop-down list and click OK.
See also
CaptureModeonpage17
.
Set Power Line Frequency
Power line frequency is set the fir st time the Ax is product is accessed and can only be changed from Plain Con fig(see
page 44
)
or by resetting the product to factory default.
Select the power line freq uency (50 Hz or 6 0 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause
image flickeriftheproductisusedinfluorescent light environments.
When using 50 Hz, the m ax im um frame r ate is limited to 25 fps .
Note
Power line frequency is different in different
geographic regions. In the Americas, 60 Hz is usually used; most other parts of
the w orld use 50 Hz. Local variatio ns may apply, always check with the local authorities.
TheLiveViewPage
The controls and layout of the Live View page m ay have been customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following p
rovides an overview of each available control.
8
Loading ...
Loading ...
Loading ...