Loading ...
Loading ...
Loading ...
AXIS M3006–V Network Camera
Detectors
Detectors
Camera Tampering
Camera Tampering can gene ra te an alarm whenever the camera is repositioned, or when the lens is co vered, sprayed or severely
defocused. To send an alarm, for example an email, an action rule must be set u p.
To configure tampering:
1. Go to Detectors > Camera Tampering.
2. Set the Minim u m duration, that is, the time that must elapse before an alarm is generated. This can help prevent f als e
alarms for known conditions that affect the image.
3. Select Alarm for dark images if an alarm should be generated if lights are d immed or turned off, or if the lens is sprayed,
covered, or rendered severely out of focus.
4. Click Save.
To configure the product to send an alarm when tampering occurs:
1. Go to Events > Action Rules.
2. Click Add to set up a new action rule.
3. Enter a Name for the action rule.
4. Under Condition,selectDetectors from the Trigger list.
5. Select Tampering from the list of detectors.
6. Optionally, select a schedule and set additional conditions.
7. Select the action. To send an email, select Send Notification a
nd select a Recipient from the list of d e fined recipients.
Note
The While the rule is active option under Duration cannot be used w ith camera tampering, since camera tampering does not
have a duration and once it has been t riggered it will not automatically re turn to its untriggere d state.
For more information on actions rules, see
Events on page 29
.
Motion Detection
Motion detection is used to generate an alarm whenever movement starts or stops in the camera view.
Motion detection i s configured by defining up to 10 Include and Exclude windows:
• Include windows —define areas where motion should be detected
• Exclude windows —define areas w ithin an Include window that should be ignored (areas outside Include w indows
are automatically ignored).
For instructions, see
Set Up Motion Detection Windows on page 26
.
To control the number of motion detection alarms, the parameters Object Size, History and Sensitivity can be a djusted. See
Motion Detection Parameters on page 26
.
Once motion detection windows are configured, the Axis product can be configured to p erform actions when motion is detected.
Possible actions include uploading images and start recording. For more information, see
Setting Up an Action Rule on page 30
.
25
Loading ...
Loading ...
Loading ...