Loading ...
Loading ...
Loading ...
AXIS M3006–V Network Camera
Hardware Overview
NOTICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switch
shall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. See
Electromagnetic Compatibility (EMC)
for regulatory requirements.
SD card slot - A standard or high-capacity microSD card (no t included) can be used for local recording with remo va ble storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, g o to Setup > System
Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• ConnectingtoanAXISVideoHostingSystemservice.See
page 37
. To connect, press and hold the button for about
1 second until the Status LED flashes gree n.
• ConnectingtoAXISInternetDynamicDNSService. See
page 37
. To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See
page 44
.
LED Indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/ re d if ne tw o rk connection is unavailable or lost.
Red Flashes red for firmware upgrad e failure.
Green Shows steady green for 10 seconds for normal operation after restart.
Note
• The Status LED c an be configured to flash wh
ile an event is a ctive.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .
5
Loading ...
Loading ...
Loading ...