Loading ...
Loading ...
Loading ...
AXIS M3006–V Network Camera
Events
Events
The Axis product can be configure d to perform actions when di ffe rent events occur, for exa m ple , start a recording whe n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include :
• Applications — use installed applications to trigger the rule, see
Applications on page 28
.
• Detectors
- Motion Detection — trigger the rule w hen motion is detected, see
Motion Detection on page 25
.
- Tampering — trigger the rule when tampering is detected, see
Camera Tampering on page 25
.
• Hardware
- Network — trigger the rule if network connection is lost or restored. This can for example be u sed to start
recording to the SD card.
• Input Signal
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on
theLiveViewPageonpage 9
. This can for example be used to validate actions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the camera view moves due to a PTZ o peration. This can for example be used
as an additional condition to pre vent an action rule triggered by motion detection to record video while the
camera view m oves due to a PTZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from the p reset posi
tion.
• Storage
- Available — trigger the rule when the storage dev
ice is unmounted or removed. This can for example be
used to send maintenance notifica tio ns.
- Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be
overwritten to prevent the s torage device from becoming full.
- Locked — trigger the rule if the storage device is locked (write protected).
• System
- System Initializing — trigger the rule w he n the product is being started. This can for exam p le be used to send a
notifi
cation when the product restarts.
• T
ime
- Recurrence — trigger the rule periodically, see
Recurrences on page 31
. This can for example be used to upload
an im a ge every 5 minutes.
- Use Schedule — trigger the rule a cco rding to the selected schedule, see
Schedules on page 31
.
Available actions include:
• PTZ Control
- Preset Position — go to a preset position.
- Guard Tour — start a guard tour, see
Guard Tour on page 24
.
29
Loading ...
Loading ...
Loading ...