Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/20765246-m3006-v-eol/bg24.png)
AXIS M3006–V Network Camera
System Op tion s
If using a host name for the NTP server, a DNS server must be configured. See
DNS Configuration on page 38
.
• Set manually allow s you to manually set date an d time.
If using an NTP server, select your Time zone from the drop-down list. If required , check Automatically a djust for daylight saving
time changes.
The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online help for information on how to create custom date and
time formats. To include date and time in the overlay text, go to Video and select Include date and Include time.
Network
Basic TCP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneo usly, and at least one version
must always be enabled.
IPv4 Address Configuration
By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via D HCP. The IPv4 settings are
configured under System Options > Network > TCP/IP > Basic.
DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only be enabled if using dynamic IP address n otificatio n, or if the DHCP can update a DN S server. It is
then possible to access the Axis product by name (host name).
If DH CP is enabled and the p roduct cannot be accessed, run A X IS IP Utility to search the network for connected Axis products, or reset
the product to the factory d efa ult settings (see
page 44
) and then perform the installation again.
To use a static IP addres s, check Use the following IP a ddress and specify the IP address, subnet mask and d efault router.
IPv6 Address Configuration
If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.
To enable IPv6, go to System O ptions > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.
ARP/Ping
The product’s IP address can be assigned usingARPandPing.Forinstructions,see
Assign IP Address using ARP/Ping on page 36
.
The ARP/Ping service is enabled by default but is automatically disabled two minutes after the product is s tarte d, or as s oon as an IP
address is assigned. To re-assig n IP address using ARP/Ping, the product must be restarted to enable ARP/Ping for an additional
two m inutes.
To disable the service, go to System Options > Network > TCP/IP > Basic and clear the option Enable ARP/Ping setting of IP address.
Pinging the product is still possible when the service is disabled.
Assign IP Address using ARP/Ping
The product's IP address can be assigned using ARP/Ping . The command must be issued within 2 m inutes of connecting power.
1. Acquire a free static IP address on the same network segment a s the computer .
2. Locate the s erial number (S/N) o n the product label.
3. Open a com mand prompt and enter the following commands:
36
Loading ...
Loading ...
Loading ...