Loading ...
Loading ...
Loading ...
SHA800A QuickGuide 11
Power Supply Information
The battery that comes with the SHA800A may need to be recharged before use.
The device can use the supplied AC-DC adapter (refer to the product technical data
sheet for ordering information). The specifications of the input AC power supply are:
100-240V, 50/60Hz; Or charge through the on-board DC adapter in the accessory.
Specifically, the analyzer can be connected to the adapter according to the power
socket shown in the figure below.
Rear View and Power
◆ Adapter factory configuration is the 12V 4A
◆ Battery factory installed, the user can change itself
WARNING
This instrument can only use Siglent approved batteries, adapters
and chargers. When using an onboard DC adapter, always ensure
that the power supply is rated at least 75 W @ 15 VDC and that
there is no dust or debris on the socket. If the adapter plug
becomes hot during operation, discontinue use immediately.
Siglent recommends taking out the batteries when devices aren't
used for too long.
Power socket
Loading ...
Loading ...
Loading ...