Samsung WD53DBA900HZA1 6.1 Cu.Ft. Bespoke AI All-in-One Washer Dryer

User Manual - Page 83

For WD53DBA900HZA1.

PDF File Manual, 284 pages, Read Online | Download pdf file

WD53DBA900HZA1 photo
Loading ...
Loading ...
Loading ...
English83
Information codes
If there is any problem, check the information message on the LCD screen and follow the on-screen
instructions.
Problem Code Action
Check drainage 5C
The Laundry Combo isn't draining properly.
Clean the drain filter, then tap Start to restart the Laundry
Combo. Or, turn it off and on again after 2-3 minutes, then
try again.
NOTE
If you perform the Condenser Cleaning function without
connecting the water supply hose, you may see the 5C code
on the LCD display. In this case, please check the drainage
and water supply status.
Check water supply 4C
Water isn't being supplied properly.
Check the faucets, then tap Start to restart the Laundry
Combo. Or, turn it on and off again after 2-3 minutes, then
try again.
Please connect the
hot/cold water hose
connection correctly
4C2
The water is too hot. Some fabrics need to be protected.
Check if the water supply hoses are properly connected,
then tap Start to restart the Laundry Combo. Or, turn it off
and on again after 2-3 minutes and try again.
Incorrect button state BC2
A button on the Laundry Combo is still pressed in.
Turn off the Laundry Combo, then turn it on again after
2-3 minutes and try again.
Open the door and evenly
distribute the load
UB
The spinning process is not performing properly because
there is not enough laundry or the load is unbalanced.
- Add more laundry or redistribute the items, then tap
Start to restart the washer. Or, turn off the product and
turn it back on after 2-3 minutes, then try again.
Waterproof items
detected
UB1
Your laundry contains waterproof items.
Remove those items, then tap Start to restart the Laundry
Combo. Or, turn it off and on again after 2-3 minutes, then
try again.
Door is open DC The door is open. Close it and try again.
Close the washer door and
try again
DC6
Auto Open Door isn't working properly.
If you turn off the power, the door will open. To use
Auto Open Door, turn off Lock and Smart control in
SmartThings.
Untitled-8 83 2024-03-21  5:39:19
Loading ...
Loading ...
Loading ...