Loading ...
Loading ...
Loading ...
Maintenance
English76
Care for an extended period of non-use
Avoid leaving the Laundry Combo unused for an extended time. However, if you intend to leave the Laundry
Combo unused for a long period of time, follow the directions below:
1. Tap .
2. On the cycle screen, select Rinse+Spin.
3. Empty the drum, and then tap and hold .
4. When the cycle is complete, close the water taps and disconnect the water hoses.
5. Turn off the Laundry Combo, and then unplug the power cord.
6. Open the door to let air circulate through the drum.
Cleaning the exterior
1. Turn off the water taps after finishing the day’s washing.
This will shut off the water supply to your Laundry Combo and prevent the unlikely possibility of
damage from escaping water. Leave the door open to allow the inside of your Laundry Combo to dry out.
2. Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the following as
recommended below:
- LCD panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads. Do not
spray cleaners directly on the panel.
- Cabinet – Clean with soap and water.
CAUTION
Make sure to turn off the Laundry Combo and unplug the power cord before cleaning.
Cleaning the interior
Clean the interior of your Laundry Combo periodically to remove any dirt, soil, odor, mold, mildew, or
bacterial residue that may remain in your Laundry Combo as a result of washing clothes.
CAUTION
Failure to follow these instructions may result in unpleasant conditions, including odors and/or permanent
stains on your Laundry Combo or laundry.
NOTE
Hard water deposits may be removed, if needed. Use a cleaner labeled "Washer safe".
Untitled-8 76 2024-03-21 5:39:18
Loading ...
Loading ...
Loading ...