Loading ...
Loading ...
Loading ...
English 57
Options Descriptions
Calibration
You can run calibration again for accurate weight detection.
• Calibration does not start if the door is not closed properly.
• The drum rotates clockwise and counterclockwise for about 3
minutes.
Self diagnosis
You can use this function to check for abnormal signs on your Laundry
Combo.
• If the Laundry Combo detects an error, an information code and
solution is displayed on the LCD panel.
Delay End
You can set the Laundry Combo to finish your wash automatically at a later time, choosing a delay of
between 5 hours to 24 hours.
1. Select a cycle and change the cycle settings as necessary.
2. Tap Delay End at the bottom of the Cycle screen.
3. Set the desired end time, and then tap OK.
- Status shows in the display and the Laundry Combo tumbles the drum to sense the weight of the
load (if load sensing is preset for the selected cycle). When load sensing is complete, the display
shows the remaining time until the end of the wash cycle.
- The time at which the operation ends may vary depending on the amount and condition of the
laundry items.
- To cancel Delay End, tap Stop to restart the Laundry Combo.
Untitled-8 57 2024-03-21 5:39:15
Loading ...
Loading ...
Loading ...