Loading ...
Loading ...
Loading ...
English 81
Problem Action
The clothes have lint on
them.
• Always make sure the lint filter is clean before putting items into the
Laundry Combo. When drying items that generate a large amount of
lint, you may need to clean the lint filter in the middle of a cycle.
• Some fabrics (such as white towels) causes more lint and should be
dried separately from fabrics that lint attaches easily (such as black
linen pants).
• Check the inside of the pockets to make sure they are empty before
drying.
Items are not dried.
Check all of the above. Additionally:
• Do not overload the Laundry Combo. If the Laundry Combo is
overloaded, it could take longer for items to dry.
• Dry heavy fabrics separately from light fabrics.
• The item(s) are too small and may not get enough spinning inside the
drum.
• Clean the filter.
• Clean the heat exchanger.
• If a drain hose is connected, make sure the water is draining properly.
Items are not dried
evenly.
• Seams, pockets, and other parts of clothing are harder to dry than
others. This is normal.
• Sort heavy and light items separately.
Has odors.
• Excessive suds collect in recesses and can cause foul odors.
• Run cleansing cycles to sanitise periodically.
• Clean the door seal (diaphragm).
• Do not attempt to dry wet items after leaving them in the Laundry
Combo for a long time.
• The Laundry Combo circulates ambient air inside and outside during
the drying process to cool the system. Using the drying in a poorly
ventilated area may, depending on the operating environment, raise
the ambient humidity level and cause a damp, soggy smell to develop.
Ensure proper ventilation when using the drying.
• Dry the interior of the Laundry Combo after a cycle has finished.
A message appears on
the display to alert that
dispenser is open.
• Check if the detergent drawer is closed properly.
- Open the detergent drawer and close it again. Make sure it’s closed
properly.
Untitled-8 81 2024-03-21 5:39:19
Loading ...
Loading ...
Loading ...