Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_155 | REV. D | EN09/23/2022Page 16 of 66
P#829867
BACK
PRIOR TO INSTALLATION
ALLOWABLE AIR TEMPERATURES
Air Temperature Water Temperature Water Pressure
Minimum 40˚F (4.4˚C) 40˚F (4.4˚C) 20 psig (1.4 bar)
Maximum 100˚F (37.8˚C) 100˚F (37.8˚C) 80 psig (5.5 bar)
Avoid running
wires or
plumbing in this
area.
SURROUNDING CABINETRY
SURROUNDING CABINETRY
9"
(228.6 mm)
16"
(406.4 mm)
11
½
"
(292.1 mm)
FRONT VIEW OF CABINETRY OPENING
ANTI-SWEAT FOAM END PANELS
When installing two or more True units side-by-side, be
sure to leave at least a 5/8” (15.88 mm) gap between
the cabinets, or install foam pads between the
cabinets and on any side without this gap, to prevent
moisture from developing on applications.
If installing anti-sweat foam end panels, True
recommends applying a panel to each of the
units being joined together. To order foam pads,
contact our parts department at 844-849-6226 or
TrueResidentialParts@TrueMfg.com.
WATER LINE, DRAIN LINE, AND
POWER CORD LOCATIONS
The ice maker must be installed with adequate
clearance for water and drain connections at the rear
of the unit.
ROUGH
OPENING
HEIGHT
34½" min
(876.3 mm)
ROUGH
OPENING
WIDTH
15" min
(381 mm)
ROUGH
OPENING
DEPTH
24" min
(609 mm)
9 7/32"
234mm
15 27/32"
402mm
11 5/8"
295mm
10 19/32"
269mm
8 13/32"
214mm
6 17/32"
166mm
1 23/32"
44mm
WATER LINE
3 7/32"
82mm
DRAIN LINE
3 11/32"
85mm
POWER CORD
ROUGH OPENING
Loading ...
Loading ...
Loading ...