Loading ...
Loading ...
Loading ...
Chapter 5 Recording and Playback
The camera can record video and audio directly to the memory card. You can play back the
recorded files on the GV-System or over the TCP/IP network.
Note: See Note for Recording at the beginning of the manual.
5.1 Recording
To enable the recording function:
1. Insert the memory card to the camera. See “To add a memory card,”
4.8.3 Storage
Settings.
2. If you like to set up pre-recording, post-recording or audio recording, see 4.1.1 Video
Settings.
3. If you like to set up the schedule for video recording or I/O monitoring, see 4.5 Recording
Schedule.
4. If you like to configure the areas and sensitivity values for motion detection, see 4.1.2
Motion Detection.
5. If you want the recording to be triggered by input device, configure the operation of I/O
devices. See 4.2.1 Input Settings.
6. To start recording and I/O monitoring, see 4.4 Monitoring.
The camera will start recording in case of motion detection, I/O trigger, or during the
scheduled time.
5.2 Playback
These methods are available to play back the video files recorded at the camera:
• Playback using the memory card by connecting it directly to the GV-System through a
memory card reader
• Playback using the Remote ViewLog function over the TCP/IP network
• Playback using the recorded files downloaded from built-in FTP Server
80
Loading ...
Loading ...
Loading ...