Loading ...
Loading ...
Loading ...
Getting Started
2
Chapter 2 Getting Started
This section provides basic information to get the camera working on the network.
2.1 Installing on a Network
These instructions describe the basic connections to install the camera on the network.
1. Using a standard network cable, connect the camera to your network.
2. Connect power using one of the methods:
• Using the supplied power adapter, connect to power. For details, see 1.7
Connecting the Data Cable.
• Use the Power over Ethernet (PoE) function. The power will be provided over the
network cable.
3. Set the IP address for the unit.
Note: See “Power over Ethernet” in Specifications later in this manual before purchasing a
PoE adapter.
2.2 Assigning an IP Address
Designed for use on the network, the camera must be assigned an IP address to make it
accessible.
Note: The camera has a default IP address of 192.168.0.10. The computer used to set
the IP address must be under the same network assigned to the unit.
15
Loading ...
Loading ...
Loading ...