Dji GOGGLES 3 User Manual

Loading ...

DJI Goggles 3 User Manual

Energy

21.6 Wh

Charging Temperature

0° to 50° C (32° to 122° F)

Max Charging Power

20 W (charging when powered o)

Runtime

[4]

Approx. 3 hours

[1] Some countries and regions prohibit the use of the 5.1GHz or 5.8GHz frequency band, or both. In some

countries and regions, the 5.1GHz frequency is only allowed for indoor use. Before ying, make sure to

check and comply with local regulations.

[2] Measured in an open outdoor environment without interference. Actual data varies with dierent aircraft

models.

[3] Measured in an outdoor open environment without interference. Actual data varies with the operating

environment.

[4] The 3-hour max operating time was measured at an ambient temperature of 25° C (77° F), screen

brightness at 4, connected to the DJI Avata 2 aircraft, video transmission set to 1080p/100fps, Head

Tracking o, Real View o, and the goggles fully charged and not supplying power to external devices

such as smartphones.

Compatible Products

Visit the following link to view compatible products:

https://www.dji.com/goggles-3/faq

Risk and Warnings

When the aircraft detects any risk after powering on, there will be a warning prompt on the

goggles screen. Pay attention to the prompt during ight and take necessary actions accordingly

to avoid product damage or risk of injury.

If the Signal Lost Action of the aircraft is set to RTH, when the control signal or transmission

is lost during ight, the aircraft will automatically initiate Failsafe RTH and y back to the last

recorded Home Point.

In emergency situations during ight, such as if a collision occurs, a motor stalls, the aircraft

rolls in the air, or the aircraft is out of control and is ascending or descending quickly, the

motors can be stopped by pressing the motion controller lock button four times.

• Stopping motors mid-ight will cause the aircraft to crash. Operate with caution.

If the goggles screen goes off unexpectedly during flight, press the motion controller lock

button once to brake the aircraft rst, and then initiate RTH manually. After the aircraft is back,

check the goggles power level and try to restart the goggles. If the problem persists, contact DJI

support.

Loading ...

Dji GOGGLES 3