Loading ...
Loading ...
Loading ...
en Cleaning
26
You can obtain a suitable glass scraper (article no.
00087670) from our after-sales service or through our
online shop.
Using a special sponge for cleaning glass-ceramic
hobs achieves great cleaning results.
Ventilation system
The filter must be regularly cleaned or replaced in order
to guarantee efficient filtration of odours and grease.
Metal grease filter
The metal grease filter must be cleaned regularly.
:Warning – Risk of fire!
Fatty deposits in the grease filter may catch fire.
Regularly clean the grease filter. Never operate the
appliance without a grease filter.
Activated charcoal filters
The activated charcoal filter should be replaced
regularly. The saturation indicator on your appliance will
tell you how frequently this needs to be done.
If you only use your appliance in air extraction mode,
change the acoustics filter as soon as it is dirty.
Saturation display
When the activated charcoal filters are saturated, an
audible signal sounds after the appliance is switched
off.
” lights up on the display.
Do not wait any longer to replace the activated charcoal
filters.
If you have replaced the activated charcoal filters, you
should reset the saturation indicator so that the ”
display goes out.
After the appliance has been switched off, ” lights up.
Press and hold the symbol for the ventilation system
until an audible signal sounds.
The activated charcoal filter saturation indicator has
now been reset.
Changing the activated charcoal filter (only in
circulating-air mode)
Activated charcoal filters trap the odour-causing
compounds in cooking smells. They are only used for
circulating-air mode.
Notes
■ The activated charcoal filters and acoustics filters
are included with the appliance. When the activated
charcoal filters or acoustics filters need to be
replaced, they can be obtained from specialist
retailers, from our after-sales service or from our
online shop.
■ The activated charcoal filters and acoustics filters
cannot be cleaned or reactivated.
■ Only use genuine replacement filters. This will
ensure that the appliance performs optimally.
1. Remove the metal grease filter.
Notes
– Grease may accumulate in the bottom of the
container. Hold the metal grease filter level to
prevent grease from dripping out.
– Make sure that the metal grease filter does not
fall and damage the cooktop.
2. Remove the four activated charcoal filters or
acoustics filters and dispose of them properly.
3. Insert two of the activated charcoal filters or
acoustics filters into the left and right of the
appliance and slide them forwards.
4. Insert the other activated charcoal filters or acoustics
filters into the left and right of the appliance.
5. Insert the metal grease filter.
Cleaning en
27
Resetting the saturation displays
If you have replaced the activated charcoal filters, you
should reset the saturation indicator so that the
”
display goes out.
After the appliance has been switched off, ” lights up.
Press and hold the symbol for the ventilation system
until an audible signal sounds.
The activated charcoal filter saturation indicator has
now been reset.
Removing metal grease filter
The metal grease filters filter the grease out of kitchen
steam. To keep it in good working order, the metal
grease filter must be cleaned regularly.
Also clean the inside of the hob extractor system
regularly. You can use a special degreaser to remove
stubborn dirt.
1. Remove the metal grease filter.
Notes
– Grease may accumulate in the bottom of the
container. Hold the metal grease filter level to
prevent grease from dripping out.
– Make sure that the metal grease filter does not
fall and damage the cooktop.
2. Clean the metal grease filters in the dishwasher or
with hot soapy water.~ "Cleaning the metal grease
filter" on page 27
3. If required, after removing the metal grease filter,
remove the activated charcoal filter and clean the
appliance from the inside.
4. After cleaning, reinsert the dried metal grease filter.
Cleaning the metal grease filter
Notes
■ Do not use aggressive, acidic or alkaline cleaning
products.
■ The metal grease filter can be cleaned in the
dishwasher or by hand.
By hand:
Note: You can use a special degreaser to remove
stubborn dirt. It can be ordered via the online shop.
■ Remove the metal grease filter.
■ Soak the metal grease filter in hot soapy water.
■ Clean the metal grease filter with a brush and then
rinse it thoroughly.
■ Leave the metal grease filter to drain.
In the dishwasher:
■ Do not clean the metal grease filter together with
cookware if heavily soiled.
■ Place the metal grease filter in the dishwasher,
leaving plenty of space around it. Do not trap the
metal grease filter.
■ For best results, place the metal grease filter in the
dishwasher filter side down.
Cleaning the overflow container
1. Unscrew the overflow container with both hands.
Note: Hold the overflow container level to prevent
liquid from leaking out.
2. Empty the overflow container and rinse it out.
3. If necessary, unscrew the screw and clean the
overflow container without the screw in the
dishwasher.
4. Clean the overflow container before screwing it back
into place.
Notes
■ Ensure that the supply to the overflow container is
not blocked. Once it has cooled down, remove any
objects that have entered the appliance. To do this,
remove the metal grease filter.
■ If liquid gets into the appliance from above, this is
collected in the overflow container. Unscrew the
overflow container and empty it.
1I
2
Loading ...
Loading ...
Loading ...