Loading ...
Loading ...
Loading ...
en Power manager
24
hPower manager
Po we r manager
You can use the power manager to set the total power
of the hob.
The hob is preset at the factory. Its maximum
performance is specified on the rating plate. You can
use the power manager to change the value in
accordance with the requirements for the relevant
electrical installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
¬ appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section ~ "Basic settings"
DCleaning
Cl eani ng
:Warning – Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:Warning – Risk of burns!
The appliance becomes hot during operation. If hot
liquids penetrate the appliance, leave the appliance to
cool before removing the metal grease filter or the
overflow container.
:Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:Warning – Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
:Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Notes
■ Only use a minimal amount of water when cleaning
so that no water enters the appliance.
■ Before cleaning, remove any jewellery from your
arms and hands.
■ Do not use any cleaning agents while the hob is still
hot. This may mark the surface. Ensure that any
residue left by cleaning agents is removed.
Cleaning agents
Only use cleaning products that are suitable for this
type of hob. Follow the manufacturer's instructions on
the product packaging.
Follow all instructions and warnings included with the
cleaning products.
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our e-Shop.
Caution!
Beware of causing surface damage
Do not use:
■ Undiluted washing-up liquid
■ Cleaning products designed for dishwashers
■ Abrasive cleaning products
■ Pressure washers or steam jet cleaners
■ Oven cleaners
■ Corrosive or aggressive cleaners, or those
containing chlorine
■ Cleaners containing a large percentage of alcohol
■ Hard, scratchy sponges, brushes or scouring pads
Cleaning en
25
Caution!
Beware of causing surface damage
Always wash new sponge cloths thoroughly before use.
To ensure that the different surfaces are not damaged
by using the wrong cleaning product, follow the
instructions in the table.
Components to clean
Hob surround (only on appliances with hob
surrounds)
To prevent damage to the hob surround, observe the
following instructions:
■ Only use warm soapy water
■ Wash new dish cloths thoroughly before use.
■ Do not use harsh or abrasive cleaning agents.
■ Do not use a glass scraper or sharp objects.
■ Do not use any hard, scratchy sponges, brushes or
scouring pads.
Hob
Clean the hob each time you use it. This will prevent
food remnants from becoming burned on. Do not clean
the hob until the residual heat indicator has gone out.
Remove boiled-over liquids immediately and do not
allow any food remnants to dry on.
Leave the metal grease filter in the appliance while you
clean the hob. Dirt and food remnants collect in the
metal grease filter and not in the appliance interior. You
can clean the metal grease filter in the dishwasher.
Clean the hob with a damp dish cloth and dry it with a
cloth to prevent limescale build-up.
Stubborn dirt is best removed with a glass scraper or
glass ceramic cleaner (available from retailers). Follow
the manufacturer's instructions.
Area Cleaning products
Glass ceramic Glass cleaner for stains due to limescale and
water marks:
Clean the cooktop as soon as it has cooled
down. You can use a cleaning product that is
suitable for glass-ceramic hobs or glass
cleaner.
Glass scraper for stains caused by sugar, rice
starch or plastic:
Clean immediately. Caution: Risk of burns.
Then clean with a damp dish cloth and dry
with a cloth.
Note: Do not use cleaning products designed
for dishwashers.
Stainless steel Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth.
Use a minimal amount of water when cleaning
to prevent water from penetrating the appli-
ance.
Leave dried-on remains to soak in a small
amount of soapy water; do not scour.
Clean stainless steel surfaces in the direction
of the finish only.
Special stainless steel cleaning products are
available from our after-sales service, through
our online shop or from specialist retailers.
Apply a very thin layer of the cleaning product
with a soft cloth.
Note: Do not use a glass scraper to clean the
cooktop surround.
Plastic Hot soapy water:
Clean with a soft cloth or in the dishwasher.
Controls Hot soapy water or an appropriate glass
cleaner:
Clean using a damp dish cloth and then dry
with a soft cloth.
No. Designation
1 Metal grease filter
2 Activated charcoal filter for air recirculation or acoustics fil-
ter for air extraction*
3 Hob
4 Control panel
5 Overflow container
*Depending on the appliance specifications
#
+
Loading ...
Loading ...
Loading ...