Loading ...
Loading ...
3
ENG
removed or broken.
34. Place the baking paper together with the food into
a pre-heated oven by putting it inside a cooker or
on an oven accessory (tray, wire grill etc.).
35. Do not put objects that children may reach on the
appliance.
36. It is important to place the wire grill and tray
properly on the wire racks and/or correctly place
the tray on the rack. Place the grill or tray between
two rails and make sure it is balanced before
putting food on it.
37. Against the risk of touching the oven heater
elements, remove excess parts of the baking
paper that hang over from the accessory or
container.
38. Never use it at higher oven temperatures than the
maximum usage temperature indicated on your
baking paper. Do not place the baking paper on
the base of the oven.
39. When the door is open, do not place any heavy
object on the door or allow children to sit on it.
You may cause the oven to overturn or the door
hinges to be damaged.
40. The packaging materials are dangerous for
children. Keep packaging materials away from the
reach of children.
41. Do not use abrasive cleaners or sharp metal
scrapers to clean the glass as the scratches that
may occur on the surface of the door glass may
cause the glass to break.
42. Do not place the appliance on a surface covered
with carpets. Electric parts gets overheated since
there will be no ventilation from below. This will
cause failure of the appliance.
43. Do not hit glass surfaces of vitro-ceramic cookers
with a hard metal, resistance can get damaged. It
may cause an electric shock.
44. User should not handle the oven by himself.
45. Use shall be careful when cleaning gas burners. It
may cause personal injuries.
46. Food can spill when foot of oven is dismantled
or gets broken, be careful. It may cause personal
injuries.
47. During usage, the internal and external surfaces of
the oven get hot. As you open the oven door, step
back to avoid the hot vapour coming out from the
interior. There is risk of burning.
48. Upper cover of the oven can be closed for a
reason, than cookware can trip over. Step back to
avoid the hot food coming on you. There is risk of
burning.
49. Do not place heavy objects when oven door is
open, risk of toppling.
50. User should not dislocate the resistance during
cleaning. It may cause an electric shock.
51. Do not remove ignition switches from the
appliance. Otherwise, live electric cables can be
accessed. It may cause an electric shock.
52. Oven supply can be disconnected during any
construction work at home. After completing the
work, re-connecting the oven shall be done by
authorized service.
53. Do not place metal utensils such as knife, fork,
spoon on the surface of the appliance, since they
will get hot.
54. To prevent overheating, the appliance should not
be installed behind of a decorative cover.
55. Turn off the appliance before removing the
safeguards. After cleaning, install the safeguards
according to instructions.
56. Cable fixing point shall be protected.
57. WARNING: Don’t use oven and grill burners at
same time.
58. Please don’t cook the food directly on the tray /
grid. Please put the food into or on appropriate
tools before putting them in the oven.
59. Hot surface, leave for cooling before closing the
cover.
60. CAUTION: If the glass of the stove is broken,
turn off any heating element immediately and
disconnect the appliance from power source,
do not touch the surface of the appliance and
do not use the appliance.
Electrical Safety
1. Plug the appliance in a grounded socket
protected by a fuse conforming to the values
specified in the technical specifications chart.
2. Have an authorized electrician set grounding
equipment. Our company shall not be responsible
for the damages that shall be incurred due to
using the product without grounding according to
local regulations.
3. The circuit breaker switches of the oven shall be
placed so that end user can reach them when the
oven is installed.
4. The power supply cord (the cord with plug) shall
not contact the hot parts of the appliance.
5. If the power supply cord (the cord with plug)
is damaged, this cord shall be replaced by the
manufacturer or its service agent or an equally
qualified personnel to prevent a hazardous
situation.
6. Never wash the product by spraying or pouring
water on it! There is a risk of electrocution.
Loading ...
Loading ...
Loading ...