ILve PWI60MP 60cm Freestanding Electric Oven/Stove

Operating & Installation Manual - Page 31

For PWI60MP.

PDF File Manual, 64 pages, Read Online | Download pdf file

PWI60MP photo
Loading ...
Loading ...
Loading ...
Leave the oven with the door closed
and in this time the fat absorbed in the
catalytic liners will burn off the liners
and the elements.
All ILVE ovens use easy clean vitreous
enamel interiors giving a smooth black
non staining appearance.
Once the oven is cool you may need to
wipe the base of the oven with a damp
sponge to remove the product of the
burn off. The side liners can be washed
in hot soapy water and are to be dried
before placing them back in the oven.
The enamel of the oven should be
wiped with warm, soapy water at
regular intervals and after each use
when cooking recipes with a high salt
and or lemon content.
The fat filter at the rear of your oven
has to be cleaned on a regular basis;
the filter can be cleaned with hot soapy
water, or in the dishwasher
NOTE: It is important that you to not
use any caustic oven cleaner as this
will ruin the liners
3. Removal of door & inner
glass
For ease of cleaning ILVE have made
their oven doors removable so that
the interior oven glass can be removed
and cleaned.
A. Removal of door
Open the door fully and lift latches (A)
and hook into arm (B) on both sides.
Lift door gently upwards (C), as if
closing, using both hands placed either
side of the outer glass edge and door
should loosen. Gently pull the door
up towards you. If force is needed the
door is not in the correct position and
you will need to repeat the procedure.
To refit the door reverse the procedure.
B. Removal of inner glass
ILVE oven doors are fitted with
athermic door glass panels, the inner
panels are removable. To remove glass
open the door fully and lift latches (A)
and hook into arm (B) on both sides
and unscrew the thumb screws (D&E)
located on the top of door, remove top
strip and gently remove glass (F&G)
before washing in hot soapy water. The
interior glass can also be cleaned with
a damp cloth. When replacing the glass
it is important that the tinted surface
faces in towards the interior of the oven
and that the top strip is replaced before
screwing the glass back in place.
Please note: The oven door glass
must be replaced the same way it was
removed with the tint facing the inside
of the oven.
IMPORTANT: NEVER USE
ALUMINIUM FOIL ON THE BASE OF
THE OVEN OR ON ANY ENAMEL
SURFACE INCLUDING THE BAKING
TRAY.
To ensure even heat distribution and
longevity, remove the baking tray from
the oven when you are not using it.
A
B
C
D
E
F
G
31ILVE Freestanding Operating Manual
Loading ...
Loading ...
Loading ...