Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 71
◆ External voltage control current output:
Setting method: Menu → 2.Configure → 8.Current control , press the knob or
the Set button to enter the setting interface, then press the knob or the Set button
to enter the selection, and then press the knob or the to set button to select
, and then press the knob or the Set button to confirm .
Load
DC
SPS5000X
+
-
Analog
connector
DC
V_PROG_
Current
0-10V
2 core shielded
wire or twisted pair
2
6
External voltage control current output
◆ External resistance control current output:
The operation method is the same as (external voltage control current output), select
and confirm .
Load
DC
SPS5000X
+
-
Analog
connector
R_PROG_
Current
0-10K
2 core shielded
wire or twisted pair
2
6
External resistance control current output
External Control Output On/Off
When set to ON, the Output button on the front panel is invalid. The output is controlled by
the rear analog interface pin15 low-level effective control, and the reference ground is pin 2
(COM).
Loading ...
Loading ...
Loading ...