Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 61
(3) CH1/CH2/CH3 parallel
Before realizing parallel output, you need to set the mode of SPS and connect the output
port and the back-end analog interface.
Mode setting
Setting method: Menu → 1.System → 5.M/S mode settings to enter the
setting interface, press the knob to display a cursor, turn the knob to select the
configuration of the slave/slave mode, and press the knob to make the setting effective.
Set CH1 to PAR2 according to the above method, the state of CH2 and CH3 will be
automatically selected according to the setting of CH1, at this time, CH1/CH2/CH3 are
output in parallel.
Output port connection
Analog port connection
User can use the analog connection line option to realize the analog port connection
between the three channels. You can also make your own connection lines according to
the corresponding relationship of each port number to achieve connection control
between channels.
-
+
Load
-
+
CH3
-
+
CH2
-
+
CH1
SPS5045X
SPS5085X
SPS5165X
Loading ...
Loading ...
Loading ...