Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 68
Setting method: Menu → 3.Operating Mode to proceed to the next submenu interface.
Press the knob to enter the 1.Mode interface , and you can select the CC/CV mode. After
pressing the knob, turn the knob to switch between CC or CV. Press the knob to confirm and
the setting takes effect. When CC is displayed, it means that it is currently in CC mode.
Press Esc to return to the previous menu.
Turn the knob to 2.Priority mode and press the knob to enter, you can set the mode as
high-speed priority or slope priority. The setting method is the same as above, and the
setting takes effect after pressing the knob to confirm. When High Speed is displayed, it
means that the current mode is high-speed priority mode, and the slope cannot be edited in
this mode. Press Esc to return to the previous menu.
When set to slope priority mode, press the knob to enter the 3.Slew value interface, you
can set the voltage rise/fall slope or current rise/fall slope.
Set Output On/Off Delay Time
The SPS5000X can be set to turn on the output delay function and turn off the output delay
function.
Setting method: Menu → 2.Configure → 4.Output delay to enter the setting
interface. In the interface, press the knob to display a cursor, press to switch the
setting of on delay or off delay, press key to switch the number of digits, and turn the
knob to change the value. After the setting is completed, you need to press the knob to
confirm.
Loading ...
Loading ...
Loading ...