Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 10
be connected to lug labeled with the letter L.
The wire which is coloured Green(American Standard) or Green-yellow(European
standard) should be connected to the earth symbol .
The wire which is coloured White(American Standard) or Blue(European standard) should
be connected to lug labeled with the letter N.
Finally, fix the metal cover on the casing with screws and tighten the black fixing parts.
Wire connections must be made by a professional. If you have questions, please refer to
the instructions or contact your local SIGLENT dealer.
Output Port connections
Make sure to turn off the power before connecting the cable to the
output port, install the plastic protective shell and tighten the
screws.
Warning: The power switch must be turned off before installing wiring at
the power output terminal.The plastic protective shell must be installed
before turning on the power supply.
Otherwise, there may be a risk of electric shock.
The front and rear outputs cannot be used at the same time. When the
front output is connected with the load, the rear port should not be
connected with the load.
Cleaning
Clean only the exterior of the instrument, using a damp, soft cloth. Do not use chemicals or
abrasive elements. Under no circumstances should you allow moisture to penetrate the
instrument. To avoid electrical shock, unplug the power cord from the AC outlet before
cleaning.
Output port connections
Loading ...
Loading ...
Loading ...