Loading ...
Loading ...
Loading ...
-
6
1 Main switch
Position 0: Appliance is decommis-
sioned
Position I: The appliance is ready for
operation.
2 Button suction blower with indicator
lamp
Lamp is illuminated: Suction blower
and filter dedusting deactivated:
– for sweeping damp or wet floors, or fi-
brous dry waste such as straw, hay, etc.
Lamp off: Suction blower and filter de-
dusting activated (default):
– for sweeping dry floors
3 KIK-key (Kärcher Intelligent Key)
yellow - operator
grey - supervisor
4 Display sweeping programme "ECO"
– for even floors with minor soiling
Note: This sweeping programme is ac-
tivated by default with every start-up of
the sweeping system, even if another
sweeping programme was selected be-
fore.
Note: The selected sweeping pro-
gramme is shown on the display, the
setting is effected by means of the di-
rection keys.
5 Display sweeping programme "MEDI-
UM"
– for normally soiled floors
6 Display sweeping programme
"HEAVY"
– for heavily soiled and uneven floors
7 Display
8 Lift waste container (high emptying sys-
tem) and direction key "upwards"
9 Tip out waste container (high emptying
system) and direction key "to the right"
10 Confirmation key "OK"
11 Lower waste container (high emptying
system) and direction key "down"
12 Swivel in waste container (high empty-
ing system) and direction key "to the
left"
13 Selector for the direction of travel
14 Horn
15 Program selection switch
The default language on the display is Eng-
lish.
Select the desired language on the control
panel prior to working with the machine.
How the language is set for the yellow and
grey key (Intelligent Key) is shown in the il-
lustrated brief instructions on Page 2 of
these operating instructions or in the follow-
ing Chapter "Intelligent Key yellow/grey".
The parameters for the various cleaning
programmes are preset. The indication
takes place on the display.
The texts on the display are plain texts and
therefore self-explanatory. The selection of
the desired sweeping program is made by
means of the direction key "to the right".
Shown display texts are:
>Battery charge indicator<
>Operating hours and sweeping pro-
gramme<
>Usability of the roller brush: .. %<
>Day counter .. h .. min<
Extra with upgrade kits:
>Switch on beacon light<
>Switch on working light<
If you wish to permanently change the pa-
rameters, you must use a grey KIK-key to
make the settings. The procedure is de-
scribed in section "Grey KIK-key".
With the grey KIK-key the authorisations for
the yellow KIK-key are enabled.
Parameters that are adjusted with the grey
KIK-key are kept until another setting is se-
lected.
Insert the grey KIK-key.
Turn the programme selector switch to
"ON".
Push the direction key "upwards" or
"downwards" until the >key manager<
menu appears.
Note: In this menu item the authorisa-
tions for the yellow KIK-key are ena-
bled.
Confirm the message with the "OK"
key.
Remove the grey KIK-key and within
the seconds being counted down insert
the yellow KIK-key that is to be person-
alised.
Push the direction keys "upwards" or
"downwards" and select menu items.
To transfer the settings to the yellow
KIK-key:
While the seconds are counted down,
select >YES< with the direction key "to
the right" and confirm with the "OK" key.
Note: Thereby the settings made are
transferred to the yellow KIK-key and
are enabled.
Operating field
Control elements on the control panel
Language setting on the control panel
KIK-key (Kärcher Intelligent Key)
yellow/grey
Yellow KIK-key
Grey KIK-key
Available menu items are:
>Language selection<
18 languages are available in the language
selection, among others German, English,
French, Spanish, Greek and Russian.
>Device operation locked/enabled<
The yellow KIK-key can be locked for the
operation of this machine here.
>Sweeping track locked/enabled<
With a locked sweeping track the sweeping
programme ECO, MEDIUM or HEAVY is to
be set and cannot be changed by the oper-
ator. With an enabled sweeping track you
can change between the 3 sweeping pro-
grammes during operation.
>Dust level locked/enabled<
Adaption of the automatic filter cleaning
(TACT) to the environment.
>Light on/off<
The operator can switch on/off the light
(optional).
Note: The light turns on automatically
when the device is started.
>Light locked/enabled<
Continuous operation with light is activated
or locked.
>Flashing beacon locked/enabled<
The operator can choose whether he or
she wants to drive with or without the flash-
ing beacon; when starting the device, the
flashing beacon is on automatically.
>Flashing beacon mode locked/ena-
bled<
It can be selected whether the flashing
beacon is necessarily on (even if it has
been switched off by the operator) or not.
>Speed locked/enabled<
Without function
>Sweeping speed locked/enabled<
Without function
>Blower/pump locked/enabled<
Without function
>Enable delete day counter<
It can be selected whether the operator is
able to reset the day counter.
>Programming yes/no<
As the last menu item the >Program-
ming< display with the seconds counted
down appears.
Available menu items are:
31EN
Loading ...
Loading ...
Loading ...