Loading ...
Loading ...
Loading ...
-
13
� DANGER
Risk of personal injury or damage!
Mind the weight of the appliance during
transport.
�
DANGER
Risk of accident, risk of injury!
When loading the device, the drive and
the parking brake must be operational.
The appliance must always be moved
up or down slopes by engaging self-
propulsion.
Secure the wheels of the machine with
wheel chocks.
Secure the machine with tensioning
straps or cables.
Note: Observe markings for fixing
points on the base frame (chain sym-
bols). Only unload the appliance on lev-
el grounds.
Illustration is symbolic, here KM 105/...
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
� CAUTION
Risk of personal injury or damage!
Consider the weight of the appliance
when storing it.
Park the machine in a safe and dry
place.
If the sweeper is going to be out of service
for a longer time period, observe the follow-
ing points:
Park the machine on an even surface.
Clean the inside and outside of the
sweeper.
Park the machine in a safe and dry
place.
Turn the program selection switch to
"OFF".
Remove KIK-key.
Main switch to position 0.
Disconnect the negative terminal of the
battery if the appliances is not used for
more than 4 weeks.
Charge battery approx. every 2 months.
� DANGER
First switch off the device and remove the
KIK-key (Kärcher Intelligent Key) before
performing any cleaning or maintenance
tasks on the device, replacing parts or
switching over to another function.
The mains plug of the charger may not be
plugged in during cleaning and servicing of
the device.
Always disconnect the battery when work-
ing on the electrics.
Turn the program selection switch to
"OFF".
Remove KIK-key.
During ongoing battery charging pro-
cess: Wait until the end of the charging
process and/or remove the plugged-in
mains plug of the charger.
– Maintenance work may only be carried
out by approved customer service out-
lets or experts in this field who are famil-
iar with the respective safety regula-
tions.
– Mobile appliances used for commercial
purposes are subject to safety inspec-
tions according to VDE 0701.
– Use only roller brushes/ side-brushes
that are provided with the appliance or
specified in the Operations Manual.
The use of other roller brushes/ side-
brushes can affect the safety of the ap-
pliance.
– The battery installed in the device is
low-maintenance.
� CAUTION
Risk of damage! Do not clean the appliance
with a water hose or high-pressure water
jet (danger of short circuits or other dam-
age).
Do not use aggressive and abrasive deter-
gents.
� Danger
Risk of injury! Wear dust mask and protec-
tive goggles.
Open left cover.
Blow through machine with com-
pressed air.
Clean the machine with a damp cloth
which has been soaked in mild deter-
gent.
Close left cover.
Clean the machine with a damp cloth
which has been soaked in mild deter-
gent.
Observe the inspection checklist!
The service hour counter indicates the time
of the maintenance intervals.
Turn the programme selector switch to
"ON".
Read the service hours: Push the direc-
tion keys "upwards" or "downwards".
Note: If the value reaches "0", a service
message with the phone number of the
local service branch is displayed when
the appliance is switched on.
Note: Where maintenance is carried out by
the customer, all service and maintenance
work must be undertaken by a qualified
specialist. If required, a specialised Kärch-
er dealer may be contacted at any time.
Note: For description, see section on Main-
tenance work.
Daily maintenance:
See chapter "Prior to start/safety test".
Weekly maintenance:
Check dust filter and clean filter box, if
required.
Check moving parts for freedom of
movement.
Check the sealing strips in the sweep-
ing area for position and wear.
With appliances with high emptying
system: Check filling level at the hy-
draulic unit.
Check hydraulic lines for leaks.
Maintenance to be carried out every 200
operating hours
Check the drive belt of the roller brush
for tension, wear and function.
Maintenance following wear:
Replace sealing strips.
Replace roller brush.
Replace side brush.
Note: In order to safeguard warranty
claims, all service and maintenance work
during the warranty period must be carried
out by the authorised Kärcher Customer
Service in accordance with the mainte-
nance booklet.
Maintenance to be carried out every 200
operating hours
Maintenance to be carried out every 300
operating hours
Transport
Storage
Shutdown
Care and maintenance
General notes
Cleaning
Cleaning the inside of the machine
External cleaning of the appliance
Maintenance intervals
Maintenance by the customer
Maintenance by Customer Service
38 EN
Loading ...
Loading ...
Loading ...