Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 67
⑤ Set the output voltage value for the current number of steps.
⑥ Set the output current value for the current number of steps.
⑦ The running time is expressed in the form of hour: minute: second.
⑧ Set the output delay time of the current number of steps.
⑨ The output priority mode of the current number of steps is fast priority by default.
When Slew is selected, ⑩ rising slope and ⑪ falling slope can be set.
Set OCP/OVP
Setting method: Menu → Configure → 1.Protect , enter the setting interface. After
pressing the knob, press the up and down direction keys to move the cursor, select the knob
to change the value, and press the knob to confirm the setting takes effect.
OCP has added the switch OCP function option key. When it is displayed as On , it
means that the OCP function is on. Setting method: Press the knob on the setting interface,
move the cursor to the shadow overlay On/Off, turn the knob to select On or Off, press the
knob to confirm and the setting will take effect. When the display is Off , it means that the
OCP function is turned off and the power supply will not trigger over-current protection.
Set Bleeder Resistor Control
Setting method: Menu → Configure → 2.Shunt , enter the setting interface. Press
the knob in the interface, turn the knob to switch the Off/On options, press the knob to
confirm and the setting takes effect.
Set CC/CV Priority
The SPS5000X operation mode can be set to select CC high-speed priority, CC slope priority,
CV high-speed priority, and CV slope priority. High-speed priority makes the voltage and
current change at the fastest rate, and slope priority makes the power supply change in
voltage and current at a specified slope.
Loading ...
Loading ...
Loading ...