Loading ...
Loading ...
Loading ...
SPS5000X Series User Manual
WWW.SIGLENT.COM 44
Note
The power supplies generate an inrush current when
turned on. Please make sure that the power supply is
sufficient at the moment of turning on, especially when
multiple power supplies are turned on at the same
time.
Power Off
Press the switch button on the panel to set the 0 position to turn off the power.
Warning
It takes about 8 seconds for the power to be fully
turned on and off.
Do not turn the power on and off quickly. Please wait
at least 10 seconds before changing the output switch
state.
Attention
When the power supply is on, quickly chaging the output state may damage the power
supply. Do not continuously change the output state of the supply.
Output Port
Before connecting the output terminal to the load, consider the cable specifications and the
maximum voltage of the load. Connect the output terminal and load line with M4 screw or
M8 bolt (> 30A). If remote voltage measurement is used, remove the connection terminals
on S +, S - and output, and connect the S +, S - detection lines to the load. For the most
accurate power delivery, connect the S+ and S- as close to the load as possible
Loading ...
Loading ...
Loading ...