Loading ...
Loading ...
Loading ...
3.
WATER LEAKS FROM THE MACHINE BOTTOM
SITUATION 1
The drip tray is not placed properly.
SOLUTION
Readjust the drip tray so it can catch
during extractions.
SITUATION 2
Water tank is not placed properly.
SOLUTION
Fill up water tank with water at level.
no open areas around the tank.
SITUATION 3
Filled water tank over line.
SOLUTION
Ensure that the water does not surpass
the line.
1. 2.
Do not attempt to dismantle your machine. If the cause of failure is not listed above,
please contact us at [email protected]
RESET TO FACTORY SETTINGS
1. Turn off the machine by
pressing the ON/OFF button.
2. Press the MENU and CLEAN
button at the same time, then
press the ON/OFF button to
reset the machine.
3. The LCD screen and buttons
Afterwards, the machine will
automatically turn off.
4. Press the ON/OFF button
again to turn on the machine.
At this point, the machine has
been reset back to it's factory
setting.
AUTO SHUT-OFF FUNCTION
When your espresso machine has been switched on and has not been functioning for 30 minutes, your machine will turn itself
off automatically and the ON/OFF "red" indicator light will be disabled. Should you wish to continue using your machine,
simply press the ON/OFF button once and your espresso machine will be ready to work again.
ERROR CODE
» E0: Thermistor short circuit
» E1: On/Off button defect
» E2: Memu button defect
» E3: Clean button defect
» E4: Size button defect
» E5: Cups button defect
» E6: Start/Stop button defect
» E7: Pre-heat fuction defect
For any questions, please contact
us at [email protected]
MENU CLEAN SIZE CUPS
ON/OFF
SET/CONFIRM
START
STOP
START
STOP
E0
MENU CLEAN SIZE CUPS
ON/OFF
SET/CONFIRM
START
STOP
MENU CLEAN SIZE CUPS
GRIND
88
SEC
88
(ML)SINGLE
DOUBLE
CLEAN
HOT WATER
STEAM
NO WATER
HOT WATER
STEAM
1 2
CUPS
SECMIN
SIZE
ON/OFF
SET/CONFIRM
START
STOP
START
STOP
GRIND SIZE
23
Loading ...