Loading ...
Loading ...
Loading ...
During use, an unpleasant smell is
detected.
Is the machine being used for the rst
time?
A smell often develops when new
should disappear once the machine
has been used several times.
Has the machine just been descaled?
clean water and run the QUICK
CLEANING program once again (see
the Cleaning and Maintenance chapter
on page 18)
.
A large amount of steam is produced
in the brewing process.
The machine is clogged. Descale the machine (see the Cleaning
and Maintenance chapter on page 18)
.
The grinder is not working.
The grinder was not correctly installed. Please refer to the Mounting the Bean
Hopper chapter on page 6
The grinder is making an unusual
noise.
The grinder is clogged. Clean the bean hopper and grinder
(see the Cleaning and Maintenance
chapter on page 18).
The machine is not working.
The power cable was not correctly
plugged into the power outlet.
Plug the power cord into a wall outlet
and if the machine still ceases to
function, please contact us at
WATER TANK HAS
RUN OUT OF WATER
1. Detach the water tank from the
2. Place a cup underneath the brew
head or the steam wand.
3. Press the START/STOP button.
Water will run through the system
into the cup. The NO WATER alert will
disappear from the LCD screen.
4. Press the START/STOP button again to
resume the previous program.
IMPORTANT
• DO NOT unplug the machine or
press any buttons to disrupt the
operation.
• Please repeat the steps 2-3 times
continuously. The machine should
return to its normal settings upon
completion.
IMPORTANT
• Please clean the brew head and
the seal ring after every use.
•
while any program is running.
Otherwise the sudden release
of pressure will cause the coffee
grounds to scatter and clog up the
seal ring.
• This would lead to eventual
leakage if not cleaned properly.
RED INDICATOR LIGHT
FLASHES
MACHINE WARMING UP
AFTER TURNING ON
The "red" indicator light on the
ON/OFF button
seconds, indicating warm-up in
progress. The machine is ready
to use when the "red" indicator
light appears solid.
BLUE INDICATOR
LIGHT FLASHES
NO WATER IN THE TANK
The "blue" indicator light on the
START/STOP button will start
NO WATER alert
appears on the LCD screen when
the machine is out of water.
START
STOP
GRIND
SEC
40
(ML)SINGLE
1
CUPS
SIZE
01
MENU CLEAN SIZE CUPS
ON/OFF
SET/CONFIRM
NO WATER
MENU CLEAN SIZE CUPS
ON/OFF
SET/CONFIRM
START
STOP
BREW HEAD IS CLOGGED
1. Clean the brew head and the seal ring.
2. Fill up the water tank and install in
place.
3. Place a cup underneath and do not
4. Run the 2 CUPS Program (see the
Program Display/Functions
chapter on page 13). Repeat the
process 3-5 times until the water is
22
Loading ...
Loading ...