Loading ...
Loading ...
Loading ...
Before first use
30
Con@ctivity via a direct WiFi connec-
tion (Con@ctivity3.0)
You can find the necessary informa-
tion on connecting the ventilation
hood in the associated operating and
installation instructions.
Switch the cooktop on.
Touch the 0sensor control on any of
the numerical displays.
Touch and hold the 0 and 7sensor
controls on the numerical display at
the same time for 6seconds.
The seconds can be seen counting
down in the timer display. After the time
has elapsed, a progress light appears
during the connection attempt. If the
connection was successful, the
code: appears in the timer display.
If the connection could not be estab-
lished, the timer display will show the
code:. Repeat the steps above.
When successfully connected, 2and
3will light up constantly on the ventila-
tion hood.
Quit connection mode on the ventila-
tion hood by pressing the run-on
button.
Con@ctivity has now been activated.
With a direct WiFi connection, it is not
possible to connect the cooktop and
the ventilation hood to a home net-
work. If this is desired later, the direct
WiFi connection between the cooktop
and the ventilation hood must first be
reset (see “Before using for the first
time – Con@ctivity” and “Disconnect-
ing the WiFi” in the operating and in-
stallation instructions for the ventila-
tion hood).
Loading ...
Loading ...
Loading ...