Loading ...
Loading ...
Loading ...
English
Installation
English28
WARNING
Make sure to use the pipe connector before inserting the
drain hoses. Without the pipe connector, the drain hose
will not be positioned securely inside the wall standpipe,
causing a water leak.
To position with the pipe connector
The pipe connector can be positioned in the following ways:
A
B
Over the edge of a wash basin
The pipe connector (B) must be placed at a height of
between 24 inches (60 cm) and 35 inches (90 cm) from
the floor. To keep the spout of the drain hose bent, use
the supplied plastic hose guide (A). Secure the guide to
the wall using a hook to ensure stable drainage.
A
F
D
G
E
B C
ln a standpipe or laundry tub
The laundry tub (B) or standpipe (C) must be no shorter
than 18 inches (46 cm) and no higher or longer than 96
inches (245 cm). Make sure the pipe connector and the
standpipe are not airtight. The height of the standpipe
(E) must be 43 inches (1100 mm) or higher from the
floor.
NOTE
A: Hose guide / D: Cable tie / F : Pipe Connector / G:
85 mm
CAUTION
• Do not extend the (Y-shaped) pipe connector using
an extension hose.
• Make sure you face the tip of the pipe connector
downwards to the drain hole. Positioning the
connector tip elsewhere can cause the drained water
to flow backward.
Untitled-2 28 2021-05-17 2:04:29
Loading ...
Loading ...
Loading ...