Loading ...
Loading ...
Loading ...
English
English 19
Tools required for installation (not supplied)
Measuring tape Phillips screwdriver Level Adjustable pliers
Installation requirements
Electrical supply and grounding
• AC 120 V / 60 Hz / 15 AMP fuse or circuit breaker is required.
• Use an individual branch circuit. Connect only the washer to the circuit.
WARNING
• Do NOT use an extension cord.
• Use only the power cord that comes with the washer.
• Do NOT connect the ground wire to plastic plumbing, gas lines, or hot water pipes.
• Improperly connected grounding conductors may cause electric shock.
• To ensure proper grounding, the washer comes with a power cord featuring a three-prong grounding
plug for use in a properly installed and grounded outlet. Check with a qualified electrician or service
person if you are not sure about the grounding.
• Do not modify the provided plug. If it does not fit the outlet, call a qualified electrician to install a
proper outlet.
• To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding must be
done in accordance with local codes, or in the absence of local codes, in accordance with the National
Electrical Code, ANSI/ NFPA No. 70-Latest Revision (for the U.S.) or the Canadian Electrical Code CSA
C22.1 – Latest Revisions and local codes and ordinances. It is your responsibility to provide adequate
electrical service for your washer.
Untitled-2 19 2021-05-17 2:04:24
Loading ...
Loading ...
Loading ...