Loading ...
Loading ...
Loading ...
Beforeyou coilfor service.., ge.com
Troubleshooting Tips
Save time and moneg! Review the charts on the following
pages first and gou meg not need to call for service.
Possible Causes What To Do
Plug on range is not completelg * Make sureelectrical plug isplugged into a live,
inserted in the electrical outlet, properlg grounded outlet.
Burner hole or slits on the side * Removethe burners (on modelswith standard twin
of the burner mag be clogged, burners)or burner heads and caps (on modelswith
sealedburners}and clean them with a sewing needle
or twist-tie. Hake sure gou do not enlarge the holes.
On sealedburner models,checkand cleanthe electrode
area for burned-on food or grease.
Improper burner assembly. • Hake surethe burner parts are installed correctlg.
Seethe Coreand cleaningof theronge section.
Drip pans (if soequipped) • Hake surethe drip pansare installed correctlg.
are not installed correctly.
Pilot(s)is (are) not lit • Seethe Lightthe .SurfaceBurnerPilots section in the
(on standing pilot models). Installation Instruction&
Improper air to gas ratio. • If range isconnected to LPgas,contact the person
who installed gour range or made the conversion.
The oven gas shut-offvalve
mag have accidentallg been
moved during cleaning or
moving.
Tocheckthe oven gas shut-off valve on sealedburner
models,remove the broiler drawer or kickpanel
(seethe Coreand deoning of the range section)and
look for the gas shut-off lever at the back of the range.
Lever is
shown close,
PULLTOOPEN
Sealed burner models
• Tocheckthe oven gas shut-off valve on standard twin
burner models,raisethe cooktop and lookfor the
gas shut-off leverat the extreme right rear corner.
(Standingpilot models do not have a gas shut-off valve
on the regulator.)Follow the directions in box A or Bthat
match 9our regulator tgpe.
Leveris shown closed
Standard twin burner models
Lever isshown closed.
PULLTOOPEN _" -_\
\
Standard twin burner models
43
Loading ...
Loading ...
Loading ...